How to adjust the cleaning force when using a hand-free mop
创建于05.23
When using a hand-free mop, the adjustment of the cleaning force should be based on the material of the floor, the type of stains and actual needs. Precise control can be achieved through the following methods to balance the cleaning effect and floor protection:
First, adjust the cleaning intensity through the structure of the mop
Pressure adjustment of the mop head
Pressurized mops: Some hand-free mops are equipped with a pressing handle or a pressure lever. By increasing the downward pressure (such as pressing with one hand 3-5 times), the friction between the mop and the floor can be enhanced, making them suitable for stubborn stains (such as dry mud stains).
Lever-assisted design: Mops that utilize the lever principle (such as the rotary pressure type) apply pressure by rotating the handle or stepping on the pedal, making them suitable for effortless operation when cleaning large areas.
Selection of mop material and thickness
Microfiber mop: Suitable for smooth floors (such as tiles and wooden floors), it enhances water absorption and friction by increasing the number of mop layers (such as double-layer stacking).
Rubber cotton mop: Suitable for rough floors (such as cement floors). Adjust the cleaning power by changing the rubber cotton heads of different hardness (such as soft rubber cotton for daily cleaning and hard rubber cotton for stubborn stains).
Second, control the cleaning intensity by combining the cleaning agent with the amount of water
Adjustment of detergent concentration
For light stains: Dilute the cleaner to a ratio of 1:50 (e.g., 10ml cleaner +500ml water), suitable for daily dust cleaning.
For heavy stains: Spray the concentrated cleaner directly onto the stained area and wipe it locally with a mop. It is suitable for oil stains, beverage stains, etc.
Control of mop humidity
Slightly wet mode: Wring out the mop until it no longer drips. It is suitable for fragile floors such as wooden floors and marble, reducing the risk of water stains remaining.
Wet mode: Keep the mop at 20%-30% moisture, suitable for water-resistant floors such as tiles and cement, enhancing the cleaner's ability to dissolve stains.
Third, adjust the cleaning strategy according to different stains
Light stains (dust, hair)
Operation: Use a slightly damp mop to wipe quickly and avoid repeated friction.
Tools: Use electrostatic dust removal paper (which can absorb hair) to reduce the entanglement of the mop.
Moderate stains (footprints, food residues)
Operation: Spray a small amount of detergent on the stain, let it stand for 1 minute, and then wipe it with a mop in a "Z" shape. Use the fiber structure of the mop to wrap the stain.
Tools: Choose a mop with a scraper. Use the scraper to pre-treat the stains before mopping the floor.
Heavy stains (oil stains, glue marks)
Operation: First, pre-treat the stain with a scraper or a hard-bristled brush, and then repeatedly wipe it with a damp mop.
Tools: Use stain remover or floor wax remover (for wax stains), and use a mop as an auxiliary cleaning tool.
Fourth, adjust the cleaning method according to the material of the ground
Hard floor (tiles, marble)
Cleaning method: A slightly damp mop with moderate pressure can be used for quick cleaning.
Precautions: Avoid prolonged water accumulation to prevent the ground from slipping.
Soft flooring (wooden flooring, PVC flooring)
Cleaning method: Use a slightly damp mop to gently wipe. Avoid pressing hard.
Regularly check the wear and tear of the mop to prevent the fibers from scratching the floor.
Fifth, optimize the cleaning intensity through operational skills
Zonal cleaning method
Divide the corridor, living room and other areas into small sections, and adjust the cleaning intensity for each section separately. For instance, if there are many stains on the kitchen floor, the concentration of the cleaning agent and the humidity of the mop can be increased. If the bedroom floor is clean, the amount of detergent used should be reduced.
Cross-cleaning method
First, use a dry mop to absorb the dust, then use a wet mop for a deep cleaning, and finally dry it with a dry mop. This method is applicable to wooden floors. It can both clean and protect the ground.
Sixth, maintenance and upkeep extend the cleaning effect
Change the mop regularly
Replace the mop with a new one after using it 3 to 5 times to avoid a decrease in cleaning power due to wear and tear of the mop.
Clean the mop itself
After each use, rinse the mop bucket and mop cloth with clean water, dry them and store them in a dry and well-ventilated place to prevent bacterial growth.
Deeply clean the mop every month. Soak the mop cloth in white vinegar or baking soda solution to remove stubborn stains and odors.
Seventh, adjustment of cleaning intensity in special scenarios
Pet family
Increase the cleaning frequency (such as twice a day), with a focus on cleaning the areas where pets are active.
Use an antibacterial cleaner in combination with a slightly damp mop to reduce the residue of pet hair and bacteria.
Rainy season or humid environment
Reduce the moisture content of the mop to 10%-15% to prevent the floor from remaining damp for a long time.
After cleaning, use a dry mop to quickly absorb the water to prevent the risk of slipping.
By using the above methods, the cleaning force of the hand-free mop can be flexibly adjusted according to actual needs to achieve efficient and safe cleaning results. Whether it is daily maintenance or deep cleaning, the floor can always be kept in the best condition through scientific adjustment.
Contact
Leave your information and we will contact you.