The hand-free mop is used to clean the bacteria on the floor of the toy store

When cleaning the bacteria on the floor of a toy store, the use of hand-free mops should be combined with scientific methods and targeted tools to ensure efficient sterilization and avoid secondary pollution. The following are the specific solutions:

Disinfectant for children

Choose non-toxic and non-irritating disinfectants specifically designed for children. Avoid using products containing bleach or fortified chemical ingredients to ensure safety for children.

Dilute according to the disinfectant instructions, usually at a ratio of 1:100 to 1:200, to ensure the sterilization effect while reducing residue.

Multifunctional cleaning liquid

You can choose a cleaning liquid containing fabric softener, which can not only clean but also inhibit bacteria, and at the same time leave a fragrance on the ground and reduce dust adhesion.

Mop pretreatment

Before cleaning, first use a vacuum cleaner or a dry mop to remove large particles of garbage on the floor to prevent the mop from being scratched and at the same time reduce the amount of detergent mixed with stains.

Zonal cleaning

Divide the floor of the toy store into multiple areas (such as the game area, rest area, cashier area, etc.), and clean each area one by one to avoid repeated contamination.

Disinfection of the mop

After each use, soak the mop head in a diluted disinfectant solution (such as 84 disinfectant at a ratio of 1:100 or a special disinfectant) for 10 to 15 minutes, then rinse it thoroughly and let it dry.

Replace the mop head regularly. It is recommended to do so every 2 to 3 months to prevent bacterial growth.

Door handles, escalator handrails, etc

These areas are high-risk points for bacterial transmission and should be wiped with chlorine-containing disinfectant wipes (with a killing rate of ≥99.9%) once an hour. Corners should be disinfected with cotton swabs dipped in alcohol.

The floor of the game area

Children frequently touch the floor of the play area, so the frequency of cleaning needs to be increased. When using a hand-free mop, you can spray disinfectant first, let it stand for a few minutes, and then mop the floor to ensure the sterilization effect.

Steam mop assistance

For areas with stubborn stains or severe bacterial growth, a steam mop can be used for high-temperature disinfection. Steam mops can generate a high temperature of 160℃, with a sterilization rate as high as 99.99%. They dry immediately after mopping and leave no water stains.

Selection of mop head material

Choose the microfiber mop head, which has strong water absorption, is easy to clean and can effectively adsorb bacteria. Avoid using materials that shed easily or are difficult to clean.

A combination of "dry dragging and wet dragging"

First, carry out dry mopping to remove dust and hair from the ground. Then carry out wet mopping and thoroughly clean and sterilize with a cleaning solution containing disinfectant.

Cleaning Record Sheet

Make a "disinfection record sheet", recording information such as the time, area and disinfectant used for each cleaning, and post it in a prominent position to make parents more at ease.

Employee training

Regularly provide hygiene and disinfection training to employees to ensure they master the correct cleaning and disinfection methods. Employees should wear gloves when cleaning to avoid direct contact with disinfectants.

Sixth, safety and hygiene management

Ventilation and air exchange

After cleaning, keep the toy store well-ventilated. Open the Windows every day to ensure the indoor air is fresh and reduce the growth of bacteria.

Avoid cross-contamination

Cleaning tools should be dedicated and should not be mixed with those used in other areas, such as bathrooms. When cleaning different areas, the mop head should be replaced or the mop should be thoroughly washed.