The 360-degree rotating hand-free mop cleans hard-to-reach corners

Key points and advantages of using a 360-degree rotating hand-free mop to clean hard-to-reach areas

Cleaning of the bottom of the furniture

The mop head can freely rotate 360 degrees and can easily reach the bottom of furniture such as sofas, beds, and cabinets (with a height usually > 8cm), allowing for cleaning without moving heavy objects. For instance, the mop head is only 5cm thick. Combined with the rotating function, it can reach deep into the crevices and prevent dust accumulation.

The corners and edges are covered

When the mop head rotates, it can fit the right-angled corners and cover the corner areas through a "Z" -shaped trajectory, reducing the residual dust. For example, when cleaning the skirting board, the mop head can be rotated parallel to the wall to thoroughly remove the accumulated dust.

Multi-angle adjustment

The connection between the mop rod body and the mop head can be adjusted at an Angle. Combined with the rotation function, it can clean high places (such as chandeliers, the top of air conditioners) or low places (such as the bottom of tables, the bottom of cabinets) at different angles. For example, tilt the pole at 45 degrees and rotate the mop head to clean the edge of the chandelier.

Quickly switch directions

During the cleaning process, the direction can be changed by rotating without lifting the mop, making it suitable for cleaning narrow corridors or irregular Spaces. For example, when cleaning the corridor, rotate the mop head 180 degrees to mop the floor in the opposite direction, avoiding frequent turns.

The hard floor has no dead corners

For hard floors such as tiles and marble, the mop head can apply force evenly after rotating to clean the stains in the gaps between the tiles. For instance, when the mop head rotates, the fibrous material can penetrate deep into the crevices and absorb stubborn dirt.

Flexible operation on soft ground

When cleaning the edges of carpets or short-pile carpets, rotate the mop head and gently press the ground to avoid damaging the fibers and remove surface dust at the same time. For example, rotate the mop head to the horizontal position and gently push to clean the edge of the carpet.

Cleaning and dehydration are carried out simultaneously

After the mop head is rotated for cleaning, it can be directly placed into the hand-free washing device for cleaning and dehydration without the need for manual contact with dirt. For example, when cleaning, rotating the mop head can accelerate the shedding of stains, and when dehydrating, rotating it helps to spin dry evenly.

Reduce secondary pollution

When cleaning hard-to-reach areas, the rotation of the mop head can prevent stains from remaining. Combined with the no-hand-wash function, it ensures that the mop is clean every time it is used, avoiding cross-contamination. For example, after cleaning the corner of the wall, wash the mop immediately to prevent the stains from spreading.

Avoid excessive force.

When rotating the mop head, there is no need to apply excessive force. The cleaning can be completed by utilizing the length of the rod and the rotational inertia, avoiding damage to the components.

Regularly inspect the rotating parts

Regularly check whether the connection between the mop head and the rod body is loose to ensure the normal rotation function and extend the service life.

Adapt to cleaning scenarios

For particularly narrow Spaces (such as the bottom of a refrigerator), you can pair it with an ultra-thin mop head or an extension rod to further enhance the cleaning power.